Safety Information

Use It Right. Use It Safe.

Vinyl Ripper is a professional-grade solvent cleaner. Read all safety information before use.

Vinyl Ripper Professional Vinyl & Adhesive Remover is a fast-acting solvent cleaner formulated to soften pressure-sensitive adhesive and help lift vinyl, decal and graphic residue from solvent-tolerant surfaces.

Warnings

DANGER

Extremely Flammable — Fire & Explosion Risk

Vapors may cause a flash fire or ignite explosively. Keep away from heat, sparks, flame, pilot lights, static discharge and every other source of ignition. Extinguish flames and pilot lights; turn off stoves, heaters, electric motors and other ignition sources before use and until all vapors are gone. Do not smoke. Do not operate lights, outlets or switches in the work area. Beware of static electricity from synthetic clothing and other sources.

DANGER

Use Only With Adequate Ventilation

Do not use where vapors can collect or concentrate, including basements, bathrooms, closets, vehicle interiors or other small enclosed areas. When working indoors, open windows and doors and maintain strong cross-ventilation with moving fresh air. If a strong odor is noticed or you feel light-headed, dizzy, nauseated or irritated, STOP — ventilation is inadequate. Leave the area immediately. If the work area is not well ventilated, do not use this product. A dust mask does not protect against solvent vapors.

WARNING

Vapor Harmful — Eye Irritant

Contains a solvent blend. Keep container tightly closed when not in use. Repeated or prolonged overexposure to solvents has been associated with neurological and other physiological injury. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal. Do not take internally. Avoid breathing vapor or mist. Avoid contact with eyes, skin and clothing. Wear solvent-resistant gloves and splash-resistant eye protection.

Directions for Use

  1. Use only as directed. Test in a small hidden area to confirm compatibility with the surface and vinyl or adhesive.

  2. Heat the vinyl surface to at least 140°F using a corded heat gun. Immediately spray Vinyl Ripper directly onto the heated vinyl or adhesive residue.

  3. Turn off, unplug and remove the heat gun from the work area before continuing.

  4. Allow 30 seconds to 1 minute of dwell time. Peel off the vinyl or remove it with a plastic razor blade.

  5. For old or cracked vinyl, heat the vinyl and apply Vinyl Ripper as directed above. Wait 30 seconds. After the surface is dry and all vapors have dissipated, reheat the vinyl, turn off and remove the heat gun, then apply Vinyl Ripper again. Wait another 30 seconds before scraping off the vinyl with a plastic razor blade.

Important

Do not treat an area larger than 1 sq. ft. at one time. Fire and health risks rise sharply when more product and vapor are present. Solvent-based products may soften, haze, stain or damage certain plastics, synthetic materials, fresh or repaired paint, paint with no clear coat, rubber, decals and other finishes. Use on a warm surface. Always use in a well-ventilated area.

Personal Protective Equipment

  • Solvent-resistant gloves
  • Splash-resistant eye protection
  • Work in a well-ventilated area — a dust mask does not protect against solvent vapors
  • Avoid synthetic clothing that may generate static electricity

First Aid

Poison Control: 1-800-222-1222

Inhalation

Move person to fresh air. If breathing has stopped, give artificial respiration and call 911 or Poison Control at 1-800-222-1222. Seek prompt medical attention.

Eyes

Immediately rinse cautiously with clean water for at least 15 minutes. Remove contact lenses if easy to do and continue rinsing. Call 911, Poison Control or a doctor.

Skin

Wash promptly with soap and water. Remove contaminated clothing and shoes; wash before reuse. Seek medical advice if irritation persists.

If Swallowed

Immediately call 911, Poison Control or an emergency room. Do not induce vomiting unless directed by medical personnel. Never give anything by mouth to an unconscious person.

Storage & Disposal

Store locked up in a cool, dry, well-ventilated place away from heat and ignition sources. Keep the container upright and tightly closed. Dispose of contents and container according to applicable local, state and federal requirements. Keep out of reach of children.

Distributed by
Stingray Chemicals, LLC
Category
General Purpose Adhesive Remover
VOC Limit
20% by weight

Questions About Safe Use?

Contact our team — we're happy to help with application guidance, surface compatibility questions or SDS requests.

Contact Us